How do I connect my AD-7000 PLUS speaker to my TV? A: You can connect the system to your TV via an AUX cable. Plug one end into the Audio Output of your TV and the other end into the Audio Input of the AD-7000 PLUS. If your TV supports Bluetooth, you can also pair the speaker system wirelessly. How do the control the AD-7000 PLUS speaker? A: Use the toggle controls on the RAD-7000 PLUS allow you to adjust volume, toggle between different audio sources, and switch the system on or off. The remote control provides additional controls including Bluetooth pairing and specific audio settings. How do I pair my device via Bluetooth to theAD-7000 PLUS? On your device, turn on Bluetooth and search for available devices. The AD-7000 PLUS should appear in the list. Select it to initiate pairing. If asked for a password, refer to your user manual, but many devices use '0000' or '1234'. How can I achieve the best surround sound with the AD-7000 PLUS system? The optimal placement of speakers for surround sound is important. The main subwoofer can be placed near the TV while the satellite speakers should be placed in such manner that the sound is distributed in the room. What can I do if one of my satellite speakers is not working? Check to make sure all connections are secure and the speaker is properly powered. If the problem persists, the speaker may be faulty or the wire may be damaged. Consult your user manual or contact Audionic support. How can I adjust the bass level on the AD-7000 PLUS Speaker system? You can adjust the bass level using the remote control. Look for the bass control button and adjust it to your liking. Can I connect multiple devices to my AD-7000 PLUS speaker system at the same time? A: Generally, the AD-7000 PLUS system can only be connected to one audio source at a time. However, you can easily switch between devices by disconnecting the current device and pairing another. What should I do if the sound quality is poor? A: Make sure the audio source is of good quality. Poorly recorded or compressed audio will not sound good on any speaker system. Also, make sure the AD-7000 PLUS and the source device's volume are set appropriately - extreme high or low settings can distort sound.
